Orbital Shaker Incubator
DIGIQUAL Manufactures Laboratory Model Orbital Shaker Incubators with Both Cooling & Heating Conditions. The Outer Chamber of the Instrument is Fabricated with a Mild Steel Sheet of 1.2 mm Thick with Powder Coating, Inner Chamber is made of 1.6 mm Thick SS 304 Sheets
Cooling is done by Implementing Emerson Make Compressor & Condenser with Cooling Coils Inside the Chamber. Cooling can be Achieved at 5 * C within 45 Mins. The compressor Has Relay Start & Stop, so the Accuracy of the chamber is Maintained +/- 1 * C. For Heating Electric Air Heater is Fixed inside the Chamber, which produces Heat to a Max of 60 * C.
Shaker Mechanism – SS Base Platform with Shakers are Fixed at the Bottom of the Incubator Chamber.
Shaker is Fixed to a BDC Motor which Gives long Life & good stability while Shaking. The capacity of Flasks can be interchanged. The speed of the Shaker is Controlled by LCD Display Control Module which can vary RPM from 1 to 300 .
Overall Incubator is Fixed with Bottom Wheels for Easy Movement inside the Laboratory. Instrument Works of 220 V AC & 20 Amps Load.
Temp Range of Incubator: 5 * C to 60 * C
Shaker Speed: 1 to 300 RPM Digitally Controlled by Module.
|325 x 325 x 325 mm
|450 x 450 x 450 mm
|600 x 600 x 600 mm